Pinnacle-systems DR Manual de usuario descargar pdf (Pagina 32)

Accessories

DIN-rail Controller Module

Tolerance: +/- 0.10 inches / .025cm

Cornering Mirrors

Through the use of cornering mirrors, multiple sides or

work envelopes can be guarded which enhance safety

and down-time related to mechanical and electrical

interlock systems. Be sure to include a reﬂ ectivity

loss per mirror (15% for MGM, 10% for TRM) when

calculating total scanning distance of light curtain.

WARNING: If you are using Auto Blank or Floating

Blank options, you may unknowingly create a hole

around your machine. Do not use mirrors with

blanking unless you need blanking on all guarded

sides.

Figure 10: Cornering Mirror Dimensions

Table 7: Cornering Mirror Dimensions

MODEL DIM A (in/mm) DIM B (in/mm) DIM C (in/mm)

(hole to hole (mirror length) (total length)

distance)

TRM-04 / MGM-04 7.45 / 189 6.25 / 159 8.50 / 216

TRM-08 / MGM-08 11.45 / 240 10.25 / 260 12.50 / 318

TRM-12 / MGM-12 15.45 / 392 14.25 / 362 16.50 / 419

TRM-16 / MGM-16 19.45 / 494 18.25 / 464 20.50 / 521

TRM-20 / MGM-20 23.45 / 595 22.25 / 565 24.50 / 622

TRM-24 / MGM-24 27.45 / 697 26.25 / 667 28.50 / 724

TRM-28 / MGM-28 31.45 / 799 30.25 / 768 32.50 / 826

TRM-32 / MGM-32 35.45 / 900 34.25 / 870 36.60 / 927

TRM-36 / MGM-36 39.45 / 1002 38.25 / 971 40.50 / 1029

TRM-40 / MGM-40 43.45 / 1104 42.24 / 1073 44.50 / 1130

TRM-44 / MGM-44 47.45 / 1208 46.25 / 1175 48.50 / 1232

TRM-48 / MGM-48 51.45 / 1307 50.25 / 1276 52.50 / 1334

TRM-52 / MGM-52 55.45 / 1408 54.25 / 1378 56.50 / 1435

TRM-56 / MGM-56 59.45 / 1510 58.25 / 1480 60.50 / 1537

TRM-60 / MGM-60 63.45 / 1612 62.25 / 1581 64.50 / 1638

TRM-64 / MGM-64 67.45 / 1713 66.25 / 1683 68.50 / 1740

NOTE: Mirrors are surface coated. Wipe surface

using only a damp, clean, soft 100% cotton cloth.

To replace broken or scratched glass, remove end

bracket and slide mirror out with gasket.

TRM DimensionsMGM Dimensions

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

Pinnacle-systems DR Manual de usuario Pagina 32