Pinnacle-systems STTS Manual de usuario descargar pdf (Pagina 9)

TECHNICAL SPECIFICATIONS (Din-Rail controller)

Power:

24VDC +/- 15% @ 7 Watts maximum

Fuse Rating: F1: 1A fuse

Max # of Mats: Up to 4 separate mat inputs

Total Response

Time: 35 mSec/mat input

Outputs: Safety: 2 N.O. outputs (open when RED) 5A@30vdc resistive

Auxiliary: N.O. or N.C. with common 5A@30vdc resistive

Fault: N.O. (open when fault or no power) 5A@30vdc resistive

NOTE: Relay current rating is de-rated by ½ for inductive loads and again

by ½ for temperatures approaching 50C

Zone Reset

Inputs: 1 input for N.O. push button for manual resetting located on front of DIN-rail

Controller or optional Remote Status Display (RSD)

Settings: Jumpers to select manual or automatic reset, up to four mats, fault reset, and

external relay checking

Indicators:

Internal: +5V – Yellow LED’s (1) Relays – Green LED’s (4)

+12V – Red LED (1) 20v – Green LED (1)

External: 4 Yellow LED's (1 per mat input) Yellow LED on = standing on mat

Yellow LED flashing = Fault with

mat/circuitry

Red/Green LED’s Green LED on = Relays energized

Red LED on = Relays de-energized

Red LED flashing = Relay fault

Dimensions: Overall: 5.9” length x 2.9” wide x 4.3” height

DIN-rail: 35mm

Tolerance: +- 0.10 inches / 02.5 cm

Environmental: 0 to 50C

Installation category I

Pollution degree 2

Altitude: up to 2000 meters

Humidity of 80% up to 31 C decreasing linearly to 50% humidity at 40 C

Indoor use

No cleaning is required.

The unit shall be supplied by a SELV source in accordance with CSA 1010.1 Annex H

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Sin comentarios

Pinnacle-systems STTS Manual de usuario Pagina 9